Nuovo caricatore IMAX B6 Duo 2x10Ah 400Watt


Nuovo caricatore della linea IMAX distribuita da BizModel.

Dati Tecnici – Technical Data
Caricabatterie con doppia uscita di carica (carica due batterie conteporaneamente).
Doppio balancer incorporato
Alimentazione a 11-18 V, comprende n.2 basette di bilanciatura da 2-3-4-5-6 celle lipo di tipo Align – Dualsky – GigaPower.
Cavo USB con software per interfaccia PC e sonda di temperatura (magnetica) compresi.

Specification:
Duo Output: 200 Watts X 2 (total: 400 Watts)
LiPo/LiFe/LiIon Cell Count: 6
NiMH/MiCd : 18
Charging Current: up to 10A X2
Discharge Current: 5A X 2(total: 50 Watts)
USB Power Charger: 5V , 1000mA (for your mobile phone, iPod, iPhone, etc)
PC LINK
Capacitive touch key sensing system with dial input

Included:
Charger
1 x 12 awg input leads with 4mm bullets plugs
1 x pair of large alligator clips with integral 4mm sockets to suit the input leads
2 x JST-XH balance adapters
2 x 18 awg charge leads with 4mm bullets on one end and unterminated on the other
1 x 18 awg charge lead with 4mm bullets on one end and alligator clips on the other
1 x temperature probe (magnetic)
1 x USB lead
1 x printed manual
1 x mini-CD with PC software (monitor/logging)

Special Features:
Optimized operating software
iMAX B6 Duo features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user’s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
iMAX B6 Duo employs an individual-cell-voltage balancer. It is not necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, iMAX B6 Duo can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
iMAX B6 Duo is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
“Fast” and “storage” mode of lithium battery
Purposes to charge Lithium battery varies, “fast” charge reduce the duration of charging whereas “store” state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery’s voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit:
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the ‘AUTO’ charging mode.
Capacity limit:
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold:
The battery s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.This function is available by connecting optional temperature probe, which is not included in our package.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
Data store/load
For users convenience,it can store maximum 10 data of different batteries.You can establish the data contains program setting of the battery to charge or discharge.these data can be called back at any time you need and the process can be executed without program setting
Cyclic charging/discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery s activity.
Input voltage: 11-18 V DC
Circuit Power:
Max.Charge Power 2x200Watts
Max.Discharge Power 2x25Watts
Charge Current Range:
0.1~10A
Discharger Current Range:
0.1~5.0A
Current drain for balancing Li-Po/Fe::
200mA/Cell
Li-ion/Poly cells: 1~6 cells
Ni-MH/NiCd cells: 1~18 cells
Pb battery voltage: 2~24v(1~10cells)
Dimensions
200x135x57mm
Weight 727g
News by automodelli.it

You can leave a response, or trackback from your own site.

Leave a Reply

You must be logged in to post a comment.